Containment | Machines & Equipment | Pharmaceutical

To protect your operator, ideally you keep him or her separated completely from any hazardous substance. In This means you have to enclose the hazardous product at the location where it is produced and keep it closed off from the operator from the point where it enters your site, all through the process, until the final packaging.

Read more
We found 37 solutions, based on your selection.
  • PREVIOUS
  • SHOW PER PAGE
  • NEXT
Start-up sterile filling line for injectables

Start-up sterile filling line for injectables

For smaller scale production of vials and syringes for the injectables market, sterile...

Start-up sterile filling line for ophthalmics

Start-up sterile filling line for ophthalmics

Commencing ophthalmic production requires sterile conditions and accurate metering when filling and sealing...

Table top sterile filling line for injectables

Table top sterile filling line for injectables

Where a compact solution is required for filling vials for the injectables market,...

Closed restricted access barrier system

Closed restricted access barrier system

Pharmaceutical production techniques often require isolation of compounds and chemicals from an external...

Compounding aseptic isolator

Compounding aseptic isolator

Bespoke aseptic isolators designed for production environments don’t meet the needs of small-scale...

Contained transfer systems

Contained transfer systems

High-performance transfer port system that combines ultimate safety, simplicity of operation and ideal...

Half-suit tester

Half-suit tester

Designed to allow operators to perform sterility testing in an aseptic environment providing...

Glove tester

Glove tester

Testing device of the containment capability of gloves, which is as important as...

Hygienic automatic iris valve

Hygienic automatic iris valve

In automated systems where controlled discharge of powders and bulk solids is required...

Hygienic hand-operated iris valve

Hygienic hand-operated iris valve

Hand-operated valves are required for the walls of clean rooms for glanding around...

Slide gate valve

Slide gate valve

In the powder and bulk handling industries, in-line shut off valves are required...

Roller gate valve

Roller gate valve

In large scale operations, modular and configurable valves are required to isolate and...

  • PREVIOUS
  • SHOW PER PAGE
  • NEXT

Not yet sure what you are looking for?

Give us a call and involve us in the process! Every production challenge is different. If we can’t help you ourselves, we will help you find the partner who can.

This is not always possible. When your product moves through different production steps it is often handled in different drums, sacks, or bulk bags. Handling these transfers can be challenging. For some hazardous chemicals / biohazards, legal occupational exposure limits (OEL) have been determined. OEL regulation sets  an upper limit on the acceptable concentration of a hazardous substance in workplace air. When no legal guidance is available, you go through the process of control banding to ensure proper risk assessment. Control banding ranks hazards in different occupational exposure bands (OEB), anywhere from “light skin and eye irritants” up to “very toxic on single exposure”. When producing medicines,  total containment not only protects humans, but also needs to protect the environment while preventing cross-contamination. We have experience with a variety of containment challenges and can advise on the required technical procedure and help you minimize investment and operating costs. Browse some of our recommended solutions below, including downflow booths, safety cabinets, rigid aseptic barrier systems but also many flexible solutions that can be customized to your particular production environment.